ALYA ROOF – TWP

• Ensure that the surfaces is clean and free of dirt, oil, loose and peeling paints and other foreign materials.

• All cracks, junctions, and roof leaking locations should be patched and necessary repairs or changes must be done on leaky roof.

• ALYA ROOF Insulation Coating application consists of a 4 layer application (1 layer of ALYA PRIMER, 2 layers of ALYA ROOF coating and 1 layer of ALYA PROTECT).

• Before the application ALYA ROOF, ALYA PRIMER should be applied with a brush or a roller on the surface that intended to be coated with ALYA ROOF.

• The coating application should be applied at least 2 hours after applying ALYA PRIMER layer ALYA ROOF thermal Insulation and waterproofing material shall be mixed homogeneously with a mixer or a mechanical mixer before coating application. However, the material is ready to use.

• Use satin roller for application.

• The roller must be dipped completely in the ALYA ROOF bucket and must be covered by the material completely, the excess material on the roller is spilled into the bucket by shaking.

• Apply on the surface slowly without pressing.

• Wait at least 12 hours before applying the second layer ALYA ROOF with the same technic used in the first layer.

• 24-18 hours after the second layer application, ALYA PROTECT varnish application can be applied to ensure the surface gain bright appearance and protection against all kinds of external factors.

WARNING: Do not walk on the surface for at least 48 hours after application.